MC74LVXC3245 Configurable Dual Supply Octal Transceiver with 3-State Outputs for 3 V Systems The 74LVXC3245 is a 24-pin dual-supply, octal configurable voltage interface transceiver especially well suited for PCMCIA and other real time configurable I/O applications. The VCCA pin accepts a 3.0 V supply level; the A port is a dedicated 3.0 V port. The VCCB pin accepts a 3.0 V-to-5.0 V supply level. The B port is configured to track the VCCB supply level. A 5.0 V level on the VCCB pin will configure the I/O pins at a 5.0 V level and a 3.0 V VCCB will configure the I/O pins at a 3.0 V level. The A port interfaces with a 3.0 V host system and the B port to the card slots. This device will allow the VCCB voltage source pin and I/O pins on the B port to float when OE is High. This feature is necessary to buffer data to and from a PCMCIA socket that permits PCMCIA cards to be inserted and removed during normal operation. The Transmit/Receive (T/R) input determines the direction of data flow. Transmit (active-High) enables data from the A port to B port. Receive (active-Low) enables data from the B port to the A port. * * * * * Bidirectional Interface Between 3.0 V and 3.0 V/5.0 V Buses Control Inputs Compatible with TTL Level Outputs Source/Sink Up to 24 mA Guaranteed Simultaneous Switching Noise Level and Dynamic Threshold Performance Available in SOIC and TSSOP Packages Flexible VCCB Operating Range Allows B Port and VCCB to Float Simultaneously When OE is High Functionally Compatible With the 74 Series 245 These Devices are Pb-Free and are RoHS Compliant (c) Semiconductor Components Industries, LLC, 2011 May, 2011 - Rev. 6 MARKING DIAGRAMS 24 24 SOIC-24 DW SUFFIX CASE 751E 1 1 LVXC3245 AWLYYWWG 1 24 24 1 Features * * * * http://onsemi.com LVXC 3245G ALYW TSSOP-24 DT SUFFIX CASE 948H 1 LVXC3245 A WL, L Y WW, W G or G = Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. Publication Order Number: MC74LVXC3245/D MC74LVXC3245 OE 22 T/R 2 VCCB NC 24 23 OE B0 B1 B2 B3 B4 B5 B6 B7 GND 22 21 20 19 18 17 16 15 14 13 A0 3 21 A1 20 1 2 VCCA T/R 3 4 5 6 7 8 9 10 A0 A1 A2 A3 A4 A5 A6 A7 11 12 A2 19 A3 OE T/R A0-A7 B0-B7 17 Function A5 Output Enable Input Transmit/Receive Input Side A 3-State Inputs or 3-State Outputs Side B 3-State Inputs or 3-State Outputs Figure 2. Logic Diagram OE T/R OPERATING MODE Non-Inverting L L B Data to A Bus L H A Data to B Bus H X Z H = High Voltage Level; L = Low Voltage Level; Z = High Impedance State; X = High or Low Voltage Level and Transitions are Acceptable; for ICC reasons, Do Not Float Inputs http://onsemi.com 2 B6 10 14 INPUTS B5 9 15 A7 B4 8 16 A6 B3 7 PIN NAMES Pins B2 6 18 A4 B1 5 GND GND Figure 1. 24-Lead Pinout (Top View) B0 4 B7 MC74LVXC3245 MAXIMUM RATINGS Symbol VCCA, VCCB VI VI/O Parameter Value DC Supply Voltage DC Input Voltage DC Input Diode Current IOK DC Output Diode Current OE, T/R -0.5 to VCCA +0.5 V An -0.5 to VCCA +0.5 V Bn -0.5 to VCCB +0.5 V OE, T/R IO DC Output Source/Sink Current ICC, IGND DC Supply Current TSTG Storage Temperature Range Unit V DC Input/Output Voltage IIK Condition -0.5 to +7.0 Per Output Pin Maximum Current DC Latchup Source/Sink Current 20 VI < GND mA 50 VO < GND; VO > VCC mA 50 mA 50 200 mA -65 to +150 C 300 mA Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. RECOMMENDED OPERATING CONDITIONS Symbol VCCA, VCCB VI VI/O TA Dt/DV Parameter Min Max Unit 2.3 3.0 3.6 5.5 V OE, T/R 0 VCCA V An Bn 0 0 VCCA VCCB V -40 +85 C 0 8 ns/V Supply Voltage (VCCA VCCB) VCCA VCCB Input Voltage Input/Output Voltage Operating Free-Air Temperature Minimum Input Edge Rate VIN from 30% to 70% of VCC; VCC at 3.0 V, 4.5 V, 5.5 V DC ELECTRICAL CHARACTERISTICS TA = 25C Symbol VIHA Parameter Minimum HIGH Level Input Voltage VIHB VILA VOHB An OE T/R Bn Maximum LOW Level Input Voltage VILB VOHA Condition An OE T/R Bn Minimum HIGH Level Output Voltage VCCA VCCB 2.3 3.0 3.6 3.0 3.6 5.5 2.0 2.0 2.0 2.0 2.0 2.0 V 2.3 3.0 3.6 3.0 3.6 5.5 2.00 2.00 3.85 2.00 2.00 3.85 V 2.3 3.0 3.6 3.0 3.6 5.5 0.8 0.8 0.8 0.8 0.8 0.8 V 2.3 3.0 3.6 3.0 3.6 5.5 0.80 0.80 1.65 0.80 0.80 1.65 V IOUT = -100 mA IOH = -12 mA IOH = -24 mA IOH = -12 mA IOH = -24 mA 3.0 3.0 3.0 2.3 2.3 3.0 3.0 3.0 3.0 4.5 2.99 2.85 2.65 2.50 2.30 2.90 2.56 2.35 2.30 2.10 2.90 2.46 2.25 2.20 2.00 V IOUT = -100 mA IOH = -12 mA IOH = -24 mA IOH = -24 mA 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.5 2.99 2.85 2.65 4.25 2.90 2.56 2.35 3.86 2.90 2.46 2.25 3.76 V VOUT 0.1 V or VCC - 0.1 V VOUT 0.1 V or VCC - 0.1 V http://onsemi.com 3 Typ TA = -40 to +85C Guaranteed Limits Unit MC74LVXC3245 DC ELECTRICAL CHARACTERISTICS TA = 25C Symbol VOLA Parameter Maximum LOW Level Output Voltage VOLB TA = -40 to +85C Condition VCCA VCCB Typ Guaranteed Limits IOUT = 100 mA IOL = 24 mA IOL = 12 mA IOL = 24 mA 3.0 3.0 2.7 2.7 3.0 3.0 3.0 4.5 0.002 0.21 0.11 0.22 0.10 0.36 0.36 0.42 0.10 0.44 0.44 0.50 V IOUT = 100 mA IOL = 24 mA IOL = 24 mA 3.0 3.0 3.0 3.0 3.0 4.5 0.002 0.21 0.18 0.10 0.36 0.36 0.10 0.44 0.44 V mA IIN Max Input Leakage Current OE, T/R VI = VCCA, GND 3.6 3.6 3.6 5.5 0.1 0.1 1.0 1.0 IOZA Max 3-State Output Leakage An VI = VIH, VIL OE = VCCA VO = VCCA, GND 3.6 3.6 3.6 5.5 0.5 0.5 5.0 5.0 IOZB Max 3-State Output Leakage Bn VI = VIH, VIL OE = VCCA VO = VCCB, GND 3.6 3.6 3.6 5.5 0.5 0.5 5.0 5.0 DICC Maximum ICC/Input Bn VI = VCCB-2.1 V 3.6 5.5 1.35 1.5 All Inputs VI = VCC-0.6 V 3.6 3.6 0.35 0.5 ICCA1 1.0 Unit mA mA mA mA Quiescent VCCA Supply Current as B Port Floats An = VCCA or GND Bn = Open, OE = VCCA, T/R = VCCA, VCCB = Open 3.6 Open 5 50 ICCA2 Quiescent VCCA Supply Current An = VCCA or GND Bn = VCCB or GND, OE = GND, T/R = GND 3.6 3.6 3.6 5.5 5 5 50 50 ICCB Quiescent VCCB Supply Current An = VCCA or GND Bn = VCCB or GND, OE = GND, T/R = VCCA 3.6 3.6 3.6 5.5 5 8 50 80 VOLPA Quiet Output Max Dynamic VOL Notes 1, 2 3.3 3.3 3.3 5.0 0.8 0.8 V Notes 1, 2 3.3 3.3 3.3 5.0 0.8 1.5 V Notes 1, 2 3.3 3.3 3.3 5.0 -0.8 -0.8 V Notes 1, 2 3.3 3.3 3.3 5.0 -0.8 -1.2 V Notes 1, 3 3.3 3.3 3.3 5.0 2.0 2.0 V Notes 1, 3 3.3 3.3 3.3 5.0 2.0 3.5 V Notes 1, 3 3.3 3.3 3.3 5.0 0.8 0.8 V Notes 1, 3 3.3 3.3 3.3 5.0 0.8 1.5 V VOLPB VOLVA Quiet Output Min Dynamic VOL VOLVB VIHDA Min HIGH Level Dynamic Input Voltage VIHDB VILDA VILDB Max LOW Level Dynamic Input Voltage mA mA mA 1. Worst case package. 2. Max number of outputs defined as (n). Data inputs are driven 0 V to VCC level; one output at GND. 3. Max number of data inputs (n) switching. (n-1) inputs switching 0 V to VCC level. Input under test switching: VCC level to threshold (VIHD), 0 V to threshold (VILD), f = 1 MHz. http://onsemi.com 4 MC74LVXC3245 AC ELECTRICAL CHARACTERISTICS TA = -40 to +85C; CL = 50 pF VCCA = 2.7-3.6 V VCCB = 4.5-5.5 V Symbol Parameter VCCA = 2.7-3.6 V VCCB = 3.0-3.6 V Min Typ (Note 4) Max Min Typ (Note 5) Max Unit tPHL tPLH Propagation Delay A to B 1.0 1.0 4.8 3.9 8.5 7.0 1.0 1.0 5.5 5.2 9.0 8.5 ns tPHL tPLH Propagation Delay B to A 1.0 1.0 3.8 4.3 7.0 8.0 1.0 1.0 4.4 5.1 7.5 8.0 ns tPZL tPZH Output Enable Time OE to B 1.0 1.0 4.7 4.8 8.5 9.0 1.0 1.0 6.0 6.1 9.5 10.0 ns tPZL tPZH Output Enable Time OE to A 1.0 1.0 5.9 5.4 10.0 9.5 1.0 1.0 6.4 5.8 10.5 9.5 ns tPHZ tPLZ Output Disable Time OE to B 1.0 1.0 4.0 3.8 8.5 8.0 1.0 1.0 6.3 4.5 10.0 8.5 ns tPHZ tPLZ Output Disable Time OE to A 1.0 1.0 4.6 3.1 10.0 7.0 1.0 1.0 5.2 3.4 10.0 7.0 ns tOSHL tOSLH Output to Output Skew, Data to Output (Note 6) 1.0 1.5 1.0 1.5 ns 4. Typical values at VCCA = 3.3 V, VCCB = 5.0 V at 25C. 5. Typical values at VCCA = 3.3 V, VCCB = 3.3 V at 25C. 6. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH); parameter guaranteed by design. CAPACITIVE CHARACTERISTICS Symbol Parameter Condition Typical Unit CIN Input Capacitance VCCA = 3.3 V; VCCB = 5.0 V 4.5 pF CI/O Input/Output Capacitance VCCA = 3.3 V; VCCB = 5.0 V 10 pF CPD Power Dissipation Capacitance (Measured at 10 MHz) VCCB = 5.0 V VCCA = 3.3 V 50 40 pF AB BA ORDERING INFORMATION Package Shipping SOIC-24 (Pb-Free) 1000 Tape & Reel MC74LVXC3245DTG TSSOP-24* (Pb-Free) 62 Units / Rail MC74LVXC3245DTR2G TSSOP-24* (Pb-Free) 2500 Tape & Reel Device MC74LVXC3245DWR2G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb-Free. http://onsemi.com 5 MC74LVXC3245 VCCA VCCB LVXC3245 SD(0:15) SLOT 0 ISA BUS (IEEE P996) LVXC3245 POWER SWITCHES PCMCIA 2.0 JEIDA 4.1 COMPATIBLE CONTROLLER SLOT 0 SLOT 1 5V VCC 3V VCC LVXC3245 SLOT 1 SD(0:15) LVXC3245 OPTIONAL Figure 3. Block Diagram Configurable I/O Application for PCMCIA Cards rail-to-rail output swings, maximizing the reliability of the interface. The VCCA pin must always be tied to a 3.3 V power supply. This voltage connection provides internal references needed to account for variations in VCCB. When connected as in the figure above, the LVXC3245 meets all the voltage and current requirements of the ISA bus standard (IEEE P996). The 74LVXC3245 is a dual-supply device well suited for PCMCIA configurable I/O applications. The LVXC3245 consumes less than 1mW of quiescent power in all modes of operation, making it ideal for low power notebook designs. The LVXC3245 meets all PCMCIA I/O voltage requirements at 5.0 V and 3.3 V operation. By tying the VCCB pin to the card voltage supply, the PCMCIA card will always have http://onsemi.com 6 MC74LVXC3245 VCC An, Bn 50% VCC 50% VCC 0V tPLH tPHL VOH 50% VCC Bn, An 50% VCC VOL WAVEFORM 1 - PROPAGATION DELAYS tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns VCC 50% VCC 50% VCC OE, T/R 0V tPHZ tPZH VCC VOH - 0.3 V 50% VCC An, Bn 0V tPZL tPLZ VCC 50% VCC An, Bn VOL + 0.3 V GND WAVEFORM 2 - OUTPUT ENABLE AND DISABLE TIMES tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns Figure 4. AC Waveforms VCC R1 PULSE GENERATOR DUT RT CL TEST RL SWITCH tPLH, tPHL, tPZH, tPHZ Open tPZL, tPLZ 2xVCC CL = 50 pF or equivalent (Includes jig and probe capacitance) RL = R1 = 500 W or equivalent RT = ZOUT of pulse generator (typically 50 W) Figure 5. Test Circuit http://onsemi.com 7 2xVCC OPEN MC74LVXC3245 PACKAGE DIMENSIONS SOIC-24 DW SUFFIX CASE 751E-04 ISSUE E -A- 24 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.13 (0.005) TOTAL IN EXCESS OF D DIMENSION AT MAXIMUM MATERIAL CONDITION. 13 -B- 12X P 0.010 (0.25) 1 M B M 12 24X D J 0.010 (0.25) M T A S B S F R C -T- SEATING PLANE 22X G K M http://onsemi.com 8 X 45 _ DIM A B C D F G J K M P R MILLIMETERS MIN MAX 15.25 15.54 7.40 7.60 2.35 2.65 0.35 0.49 0.41 0.90 1.27 BSC 0.23 0.32 0.13 0.29 0_ 8_ 10.05 10.55 0.25 0.75 INCHES MIN MAX 0.601 0.612 0.292 0.299 0.093 0.104 0.014 0.019 0.016 0.035 0.050 BSC 0.009 0.013 0.005 0.011 0_ 8_ 0.395 0.415 0.010 0.029 MC74LVXC3245 PACKAGE DIMENSIONS TSSOP-24 DT SUFFIX CASE 948H-01 ISSUE A 24X K REF 0.10 (0.004) 0.15 (0.006) T U T U M V S S S 2X 24 L/2 13 B -U- L PIN 1 IDENT. 12 1 0.15 (0.006) T U NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. 5. DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7. DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE -W-. S A -V- DIM A B C D F G H J J1 K K1 L M C 0.10 (0.004) -T- SEATING PLANE G D H -W- MILLIMETERS MIN MAX 7.70 7.90 4.30 4.50 --1.20 0.05 0.15 0.50 0.75 0.65 BSC 0.27 0.37 0.09 0.20 0.09 0.16 0.19 0.30 0.19 0.25 6.40 BSC 0_ 8_ INCHES MIN MAX 0.303 0.311 0.169 0.177 --0.047 0.002 0.006 0.020 0.030 0.026 BSC 0.011 0.015 0.004 0.008 0.004 0.006 0.007 0.012 0.007 0.010 0.252 BSC 0_ 8_ DETAIL E N K CCC EE CCC EE 0.25 (0.010) K1 J1 M N F SECTION N-N DETAIL E J ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 9 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MC74LVXC3245/D